501-16-11 Wipers and Washers 501-16-11
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
B3: CHECK THE CIRCUIT (WIPER PARK) TO RELAY – INTERMITTENT WIPE FOR SHORT TO
POWER
1.
2.
Windshield wiper
motor C47
3.
4 Measure the voltage between relay socket –
intermittent wipe, connector C48, pin 1, circuit
31S-AK9 (BK/OG) and ground.
• Is battery voltage indicated?
Yes
REPAIR the short to power, circuit(s)
connected with the relay – intermittent wipe,
connector C48, pin 1, by using the wiring
diagrams. TEST the system for normal
operation.
No
CHECK the windshield wiper motor. If nec-
essary INSTALL a new one. TEST the sys-
tem for normal operation.
B4: CHECK THE MULTIFUNCTION SWITCH FOR PROPER FUNCTION
1.
2.
Multifunction switch
C15b
3.
• Stay the wiper on continuously?
Yes
GO TO B6
No
GO TO B5
E9432 EN 07/2001 2002 Bantam
To Next Page
Loading...
