Ford 2002 Bantam - Page 175

206-00-6 Brake System — General Information 206-00-6
DIAGNOSIS AND TESTING (CONTINUED)
E1092 EN 07/2001 2002 Bantam
Condition
Possible Sources Action
• Brake drag • Brake booster.
• Incorrectly adjusted brake light
switch.
• Seized brake caliper or wheel
cylinder.
• Parking brake applied or
malfunction
• Seized parking brake cables.
• Seized brake caliper slide pins.
• GO to Pinpoint Test I.
• ADJUST the brake light switch.
• Excessive brake pedal effort • Brake booster inoperative.
• PERFORM a brake booster
functional test
Refer to the procedure in this section.
• Worn or contaminated brake
shoes or brake pads.
• INSTALL new brake shoes or
brake pads.
• GO to Pinpoint Test J.
• Brake noise • Worn brake shoes or brake
pads.
• INSTALL new brake shoes or
brake pads.
• Brake booster. • GO to Pinpoint Test K.
• Slow or incomplete brake pedal
return
• Brake booster.
• Brake master cylinder.
• GO to Pinpoint Test L.