211-00-10 Steering System — General Information 211-00-10
GENERAL PROCEDURES (CONTINUED)
All except vehicles with diesel engine
12. Connect the CKP electrical connector.
Refer to the Wiring Diagram Section 700-06
for schematic and electrical information.
All vehicles
13. Lower the vehicle.
Vehicles with diesel engine
14. Connect the fuel injection pump electrical
connector.
1. Connect the electrical connector.
2. Push in the locking handle.
All vehicles
15. Fill and bleed the power steering system.
For additional information,
refer to Power
Steering System Bleeding
in
this section
E3217 EN 07/2001 2002 Bantam
To Next Page
Loading...
