211-00-13 Steering System — General Information 211-00-13
GENERAL PROCEDURES (CONTINUED)
Vehicles with diesel engine
10. Connect the fuel injection pump electrical
connector.
1. Connect the electrical connector.
2. Push in the locking handle.
All vehicles
11. Start the engine. Turn the steering wheel
from lock to lock; if excessive noise is
apparent bl
eed the system.
For additional
information,
refer to Power Steering System
Bleeding
in this section
12. Lower the vehicle.
E3219 EN 07/2001 2002 Bantam
To Next Page
Loading...
