211-01-19 Manual Steering 211-01-19
REMOVAL AND INSTALLATION (CONTINUED)
5. Remove the track rod end locknuts.
1. Hold the ball joint studs with an Allen
key.
2. Remove the locknuts.
6. NOTE: When the track rod ends are
separated from the spindle carriers the ball
joint seals should be wrapped in a cloth to
protect them.
Disconnect the track rod end ball joints from
the spindle carriers.
Vehicles with manual transaxle
8. Disconnect the gearshift linkage.
9. Remove the roll restrictor to transmission
retaining bolt.
E5855 EN 07/2001 2002 Bantam
To Next Page
Loading...
