211-02-32 Power Steering 211-02-32
REMOVAL AND INSTALLATION (CONTINUED)
7. Disconnect the high pressure line.
• Allow the fluid to drain into a suitable
container.
8. Disconnect the power steering pump
ground cable.
9. Remove the power steering pump mounting
bracket upper bolts.
10. Remove the power steering pump, and
mounting bracket.
1 Remove the bolts.
2 Remove the power steering pump and
mounting bracket.
11. Remove the power steering pump from the
mounting bracket.
E6317 EN 07/2001 2002 Bantam
To Next Page
Loading...
