211-02-65 Power Steering 211-02-65
REMOVAL AND INSTALLATION (CONTINUED)
Installation
All Vehicles
1. Using the special tool, install a new O-ring
seal.
1. Push the new O-ring seal onto the
special tool.
2. Locate the special tool onto the union
and push on the O-ring seal.
2. Install the power steering high-pressure
line.
Vehicles with 1.6L / 1.3L engine
3. Install the power steering high-pressure line
support bracket.
E5861 EN 07/2001 2002 Bantam
To Next Page
