211-02-67 Power Steering 211-02-67
REMOVAL AND INSTALLATION (CONTINUED)
8. Install the accessory drive belt lower guard.
Vehicles with 1.6L / 1.3L engine
9. Connect the power steering high-pressure
line to the power steering pump.
1. Install the power steering pump high-
pressure line.
2. Install the power steering pump high-
pressure line support brackets.
10. Install the PSP switch.
1. Install the PSP switch.
2. Connect the electrical connector.
All Vehicles
11. Install the power steering gear floor seal.
E5861 EN 07/2001 2002 Bantam
To Next Page
