211-02-69 Power Steering 211-02-69
REMOVAL AND INSTALLATION (CONTINUED)
17. Remove the flexible pipe support.
Vehicles with manual transaxle
20. NOTE: Make sure the washer is fitted
between the gearshift stabilizer and
transmission.
Install the shift rod and gearshift stabilizer.
1. Connect the gearshift stabilizer.
2. Connect the shift rod.
21. NOTE: Before lowering the vehicle make
sure the steering is in the straight ahead
position.
Lower the vehicle.
25. Install the steering column coupling to the
power steering gear pinion.
26. Tighten the steering column shaft coupling
pinch bolt.
27. Fill and bleed the power steering system.
For additio
nal information, refer to Section
211-00.
E5861 EN 07/2001 2002 Bantam
To Next Page
Loading...
