211-02-74 Power Steering 211-02-74
REMOVAL AND INSTALLATION (CONTINUED)
18. Remove the power steering fluid cooler to
power steering gear return line.
• Allow the fluid to drain into a suitable
container.
Installation
All Vehicles
1. Using the special tool, install a new O-ring
seal.
1. Push the new O-ring seal onto the
special tool.
2. Locate the special tool onto the union
and push on the O-ring seal.
2. Install the power steering fluid cooler to
power steering gear return line.
E5862 EN 07/2001 2002 Bantam
To Next Page
Loading...
