303-01B-53 Engine — 1.6L / 1.3L RoCam 303-01B-53
IN-VEHICLE REPAIR (CONTINUED)
E6637 EN 07/2001 2002 Bantam
6. Using the special tool, remove the camshaft
sprocket.
7. Raise and support the vehicle. For
a
dditional information, refer to Section 100-
02.
8. Remove the timing chain.
1. Remove the chain tensioner arm.
2. Remove the chain guide.
• Remove the timing chain and the
crankshaft sprocket.
Installation
1. NOTE:
The crankshaft sprocket timing mark
and the single colored link on the timing chain
must line up.
NOTE:
The crankshaft sprocket timing mark
must be in the 6 o'clock position.
Install the crankshaft sprocket and the
timing chain.
To Next Page
Loading...
