303-01B-60 Engine — 1.6L / 1.3L RoCam 303-01B-60
IN-VEHICLE REPAIR (CONTINUED)
E6639 EN 07/2001 2002 Bantam
3. Install the EI coil.
4. Install the spark plug electrical connectors.
5. Raise and support the vehicle. For
additional information, refer to Section 100-
02.
6. Connect the exhaust down pipe to the
exhaust manifold.
1. Install the nuts.
2. Attach the exhaust hanger insulator.
7. Lower the vehicle.
8. Connect the battery ground cable.
To Next Page
Loading...
