303-01B-70 Engine — 1.6L / 1.3L RoCam 303-01B-70
IN-VEHICLE REPAIR (CONTINUED)
E6640 EN 07/2001 2002 Bantam
18. Install the hoses and the electrical
connector.
1. EVAP solenoid valve vacuum hose
2. PCV
3. Crankcase breather hose
4. ECT sensor electrical connector
5. Brake booster vacuum hose
19. Install the accelerator cable.
1. Hook in the inner cable.
2. Install the cable in the bracket, adjust
cable and secure with the clip.
20. Connect the fuel lines.
21. Install the air cleaner intake pipe.
22. Fill the cooling system. For additional
infor
mation, refer to Section 303-03.
23. Connect the battery ground cable.
To Next Page
Loading...
