Ford 2002 Bantam - Page 510

303-01D-6 Engine — 1.8L Diesel - Endura DE 303-01D-6
IN-VEHICLE REPAIR
E5881 EN 09/2001 2002 Bantam
Crankshaft Front Oil Seal (21 467 0)
Special Tool(s)
Universal flange holding
wrench
15-030 A
Timing peg, crankshaft TDC
position
21-104
Engine support bar
21-140
Adapter for 21-140
21-140-01
Adapter for 21-140
21-140-02
Adapter for 21-140
21-140-03
Special Tool(s)
Centering tool, remover and
installer, oil seal
21-148 A
Remover, crankshaft timing
pulley
21-200
Angle gauge, bolt tightening
21-540
Timing pin, injection pump
timing
23-019
Timing pin, injection pump
timing
23-029
Removal
1. Standard preparatory operations.
• Make a note of the radio keycode.
• Make a note of the preset radio stations.
2. Disconnect the battery ground cable.