303-01D-22 Engine — 1.8L Diesel - Endura DE 303-01D-22
IN-VEHICLE REPAIR (CONTINUED)
E6965 EN 09/2001 2002 Bantam
Installation
1. Install the auxiliary shaft oil seal housing.
1. Coat the auxiliary shaft bearing journal
with engine oil.
2. Slide the new oil seal housing with the
integrated oil seal and the plastic fitting
bush onto the auxiliary shaft bearing
journal.
3. Oil seal
4. Tighten the oil seal housing bolts.
5. Remove the support ring after installation
and check that the seal is sitting correctly.
2. Fit the timing belt side cover.
To Next Page
Loading...
