303-01D-24 Engine — 1.8L Diesel - Endura DE 303-01D-24
IN-VEHICLE REPAIR
E5882 EN 09/2001 2002 Bantam
Valve Seals (21 238 0)
Special Tool(s)
Universal flange holding
wrench
15-030 A
Installer, valve stem seals
21-007 A
Valve spring compressor
21-024
Adapter for 21-024
21-024-05
Timing peg, crankshaft TDC
position
21-104
Installer, oil seal
21-110
Special Tool(s)
Installer, valve stem collets
21-156
Pliers, valve stem oil seals
21-165
Remover/installer, cooling
hose clamp
24-003
General Equipment
Two-legged puller
Material
Specification
Sealer SPM-4G-9112-F/G
Valve stem installation
sleeves
Engine Oil ACEA B3 / E3
Removal
1. General note.
• This operation was carried out on an
engine with a mechanical timing belt
tensioner.
• When removing and installing coolant
and ventilation hoses, if necessary. For
additional information,
refer to Section 303-03.
To Next Page
Loading...
