Ford 2002 Bantam - Page 53

100-04-49 Noise, Vibration and Harshness 100-04-49
DIAGNOSIS AND TESTING (CONTINUED)
E859 EN 02/2001 2002 Bantam
CONDITIONS
DETAILS/RESULTS/ACTIONS
F3: CHECK THE FRONT SUSPENSION
1 Check the front suspension.
- Check the front suspension units, wheel
bearings, front suspension lower arm bushing
and other front suspension components.
- Compare component condition vehicle-side-
to-vehicle-side and to a known good vehicle.
REFER to Section 204-00.
• Are all the suspension components in good
condition?
 Yes
GO TO F4
 No
REFER to Section 204-00.
F4: REFINISH THE BRAKE DISCS
1 Refinish the brake discs.
- Refinish brake discs and linings and road test
the vehicle. REFER to Section 206-03.
• Is a shudder or vibration present?
 Yes
GO TO F7
 No
Condition corrected.
F5: CHECK THE REAR SUSPENSION
1 Check the rear suspension.
- Check the rear suspension units, wheel
bearings and other rear suspension
components.
REFER to Section 204-02A /
204-02B.
- Compare component condition vehicle-side-
to-vehicle-side and to a known good vehicle.
• Are all the suspension components in good
condition?
 Yes
GO TO F6
 No
REFER to Section 204-00.
F6: REFINISH THE REAR BRAKES
1 Refinish the rear brakes.
- Refinish the brake drums and install new rear
brake shoes. Road test the vehicle.
• Is a shudder or vibration present?
 Yes
GO TO F8
 No
Condition corrected.