303-01D-33 Engine — 1.8L Diesel - Endura DE 303-01D-33
IN-VEHICLE REPAIR (CONTINUED)
E5882 EN 09/2001 2002 Bantam
19. Connect the PCV hose.
20. Tighten the flange bolt of the camshaft
timing pulley.
21. Raise the vehicle.
NOTE: The timing pin must be screwed in as far
as it will go.
• Fit the timing pin.
• Carefully turn the crankshaft in the
normal direction of rotation of the engine
until it comes up against the timing pin.
22. Turn the crankshaft to the TDC position.
23. Lower the vehicle.
24. Attach the engine support bar.
25. Fit a new camshaft timing belt as described
in Operation No. 21 304 0.
To Next Page
Loading...
