Ford 2002 Bantam - Page 55

100-04-51 Noise, Vibration and Harshness 100-04-51
DIAGNOSIS AND TESTING (CONTINUED)
E859 EN 02/2001 2002 Bantam
CONDITIONS
DETAILS/RESULTS/ACTIONS
G3: INSPECT THE WHEEL AND TYRE RUN OUT
1 Inspect the wheel and tyre run out.
• Are the wheels and tires OK?
 Yes
GO TO G4
 No
REPAIR or INSTALL new wheels and tires
as necessary. REFER to Section 204-03.
TEST the system for normal operation.
G4: CARRY OUT A STATIC BALANCE TEST
1 Carry out a static balance test.
• Are the wheels and tires OK?
 Yes
GO TO G5
 No
INSTALL new wheels or tires as necessary.
TEST the system for normal operation.
G5: CARRY OUT A ROAD TEST
1 Carry out a road test.
• Does the condition still exist?
 Yes
CHECK the following items and REPAIR or
INSTALL new components as necessary;
air conditioning. REFER to Section 412-00.
Engine. REFER to Section 303-00.
Transaxle REFER to Section 308-00. TEST
the system for normal operation.
 No
Condition corrected.
PINPOINT TEST H: ENGINE RUN-UP CHECK
CONDITIONS DETAILS/RESULTS/ACTIONS
H1: CARRY OUT SETUP FOR THE ENGINE RUN-UP CHECK
1 Carry out setup.
- Block the wheels.
- Apply the parking brake.
• Are the setup preconditions met?
 Yes
GO TO H2
 No
CARRY OUT the setup procedures again.