Ford 2002 Bantam - Page 563

303-01D-59 Engine — 1.8L Diesel - Endura DE 303-01D-59
IN-VEHICLE REPAIR
E5883 EN 09/2001 2002 Bantam
Camshaft (21 283 0)
Special Tool(s)
15-030 A Universal flange
holding wrench
15-030 A Universal flange
holding wrench
Installer, camshaft oil seal
21-110
Remover/installer, cooling
hose clamp
24-003
General Equipment
Two-legged puller
Material Specification
Sealer SPM-4G-9112-F
Valve stem installation
sleeves
Engine Oil ACEA B3 / E3
Removal
1. General note.
• This operation was carried out on an
engine with a mechanical timing belt
tensioner.
• When removing and installing coolant
and ventilation hoses, if necessary. For
additional information,
refer to Section 303-03.
2. Remove camshaft timing belt as described
in Operation No. 21 304 0.
3. CAUTION: Support the engine with a
trolley jack.
Detach the engine support bar.