303-01D-108 Engine — 1.8L Diesel - Endura DE 303-01D-108
DISASSEMBLY (CONTINUED)
E6007 EN 09/2001 2002 Bantam
42. Remove the CKP sensor bracket.
43. CAUTION: Remove the sump
downwards so that no oil sludge or
abraded particles get into the engine.
Remove the sump.
44. Remove the front plate.
• Press out the crankshaft front oil seal.
45. Remove the oil intake pipe with the bracket.
46. CAUTION: Do not damage the piston
ring zone.
Remove the pistons.
NOTE: Put the big-end bearing caps and big-
end bearing shells down in order.
• Detach the big-end bearing caps.
• Remove the ring of carbon around the
upper edge of the cylinders using a
proprietary scraper.
• Press out the pistons with the connecting
rods and big-end bearing shells.
To Next Page
Loading...
