303-01D-133 Engine — 1.8L Diesel - Endura DE 303-01D-133
ASSEMBLY (CONTINUED)
E6005 EN 09/2001 2002 Bantam
39. Fit the cylinder head (continued).
CAUTION: For stage 3, slacken one
cylinder head bolt by itself, and then
tighten it to the specified torque and
angle. Only then move on to the next
bolt.
• Wait three minutes and then tighten the
cylinder head bolts according to tightening
sequence in stage 3.
40. Fit the injectors and glow plugs.
1. Glow plugs
2. Glow plug wiring
NOTE: Fit new injector heat shields.
3. Injectors
41. Fit the alternator bracket.
To Next Page
