303-01D-163 Engine — 1.8L Diesel - Endura DE 303-01D-163
INSTALLATION (CONTINUED)
E5915 EN 09/2001 2002 Bantam
62. Attach the upper coolant hose.
63. Install the air intake pipe.
1. Attach the resonator hose (clamp).
2. Insert it in the air cleaner housing (push
fit).
3. Clip it in place.
4. Attach it to the intake manifold (clamp).
64. NOTE: When tightening the nuts, hold with
an Allen key to prevent from turning.
Tighten the nut on both suspension struts.
65. Bleed the hydraulic clutch system. For
additional information,
refer to Section 308-01.
• If necessary, fill up the brake fluid
reservoir with Ford brake fluid (SAM-
6C9103-A).
To Next Page
Loading...
