303-03-174 Engine — 1.8L Diesel - Endura DE 303-01D-174
09/2001 2002 Bantam
Description
Nm
Auxiliary shaft thrust plate 9
Auxiliary shaft oil seal housing 23
Bracket of engine mounting to cylinder block 33
Blanking plug for TDC adjustment hole 24
Auxiliary shaft timing belt pulley 45
Bolt of rear cover 24
Flange of crankshaft front timing belt pulley -
stage 1
150
Flange of crankshaft front timing belt pulley -
stage 2
-90° (undo)
Flange of crankshaft front timing belt pulley -
stage 3
120
Flange of crankshaft front timing belt pulley -
stage 4
60°
Crankshaft pulley/vibration damper 35
Alternator bracket 46
Alternator to bracket 25
Clamp bolt for alternator belt tensioner 6
Crankshaft position sensor (CKP sensor) to
cylinder block
10
CKP sensor bracket 14
Torque Specifications
Description
Nm
Cylinder head bolts, stage 1. 10
Cylinder head bolts, stage 2. 100
Cylinder head bolts, stage 3. -180°(undo)
Cylinder head bolts - stage 4. 70
Cylinder head bolts - stage 5. 120°
Cylinder Head Cover 5
Fuel filter bracket 23
Vacuum pump 20
Thermostat housing 22
Exhaust Manifold 24
Exhaust gas re-circulation valve (EGR valve) 20
EGR pipe clip 10
Upper inlet manifold 23
Intake manifold to cylinder head 23
To Next Page
Loading...
