303-03-182 Engine Cooling 303-03-182
REMOVAL AND INSTALLATION
E6343 EN 09/2001 2002 Bantam
Cooling Fan Motor (24 222 0)
Removal
1. Disconnect the battery ground cable.
2. Support the radiator.
• Use suitable wire to support the radiator
to the front panel.
3. Raise the vehicle.
4. Remove the lower air deflector (four
screws).
5. Disconnect the fan multiplug and unclip the
wiring loom.
6. Disconnect the multiplug if fitted.
To Next Page
Loading...
