303-03-188 Engine Cooling 303-03-188
REMOVAL AND INSTALLATION (CONTINUED)
E5890 EN 09/2001 2002 Bantam
All vehicles
10. Support the radiator assembly and remove
the four support retaining bolts (left-hand
side shown).
11. Remove the fan and radiator assembly
complete.
12. If the radiator is to be renewed, remove the
fan assembly.
Installation
1. To install, reverse the removal procedure.
2. Refill the cooling system and check for
leaks. For additional information,
refer to Cooling System Draining,
Filling and Bleeding in this section
To Next Page
Loading...
