303-03-143 Engine Cooling 303-03-143
REMOVAL AND INSTALLATION (CONTINUED)
E5887 EN 07/2001 2002 Bantam
Thermostat — Vehicles with 1.8L Endura DE Diesel Engine (24 454 0)
Special Tool(s)
Remover/Installer, cooling
hose clamp
24-003
Removal
1. Drain the cooling system.
Refer to the
procedure in this section.
2. Disconnect the coolant hose.
3. Remove the thermostat housing.
4. Remove the thermostat.
To Next Page
Loading...
