303-03-167 Engine Cooling 303-03-167
REMOVAL AND INSTALLATION
E1001 EN 07/2001 2002 Bantam
Coolant Expansion Tank (24 284 0)
Removal
1. Drain the cooling system. For additional
inf
ormation, refer to Cooling System
Draining, Filling and Bleeding. In this
section
2. Disconnect the expansion tank hoses.
1. Disconnect the radiator to expansion
tank hose.
2. Disconnect the engine to expansion tank
hose.
3. Disconnect the engine supply hose.
3. Remove the expansion tank.
1. Remove the expansion tank retaining
screw.
2. Remove the expansion tank from the
supporting bracket.
Installation
1. To install, reverse the removal procedure.
2. Refill the cooling system. For additional
information, refer to Cooling System
Draining, Filling and Bleeding. In this
section
To Next Page
Loading...
