303-05-193 Accessory Drive 303-05-193
DIAGNOSIS AND TESTING (CONTINUED)
E6727 EN 07/2001 2002 Bantam
5. Check the belt for cracks. If the damage
exceeds the acceptable limit, install a new
accessory drive belt.
6. Check the belt for damage. If any chunks are
found to be missing, install a new accessory
drive belt.
7. If the cause is not visually evident, verify the
symptom and refer to the Symptom Chart.
Symptom Chart
Condition
Possible Sources
Action
• Belt noise or squeal • Accessory drive components
worn or damaged.
• CHECK the system with the en-
gine running and the belt re-
moved (only run the engine for a
very short period). If a noise is
apparent, the cause is not the
accessory drive system. If a
noise is not apparent, the cause
is the accessory drive system so
determine where the noise is
coming from and REPAIR or
INSTALL new components as
necessary.
• Accessory drive components
incorrectly installed.
• CHECK the accessory drive
components are correctly in-
stalled. REPAIR as necessary.
• Belt incorrectly installed. • CHECK the belt is correctly in-
stalled in the pulley grooves.
REPAIR or INSTALL a new ac-
cessory drive belt as necessary.
• Pull ey(s).
• DETERMINE where the noise is
coming from. CHECK the pul-
ley(s) for damage, freedom of
rotation or alignment. REPAIR
or INSTALL new components as
necessary.
To Next Page
Loading...
