303-06-203 Starting System 303-06-203
DESCRIPTION AND OPERATION
E5908 EN 07/2001 2002 Bantam
Starting System
Pre-engaged starter motors of Bosch or Magnetti
Morelli manufacture are used.
Irrespective of model, all starter motors have an
integral solenoid and all types have pinions,
which engage with a ring gear during starting.
The ring gear is located on the outside of the
flywheel.
Some starter motors are interchangeable in
certain circumstances;
refer to the Parts Microfiche for detailed information.
Starter motors should be serviced as an assembly
and should not, therefore, be dismantled.
To Next Page
