303-14-245 Electronic Engine Controls 303-14-245
REMOVAL AND INSTALLATION (CONTINUED)
E6694 EN 07/2001 2002 Bantam
5. Remove the hoses and the electrical
connector.
1. EVAP solenoid valve vacuum hose.
2. Positive crankcase ventilation (PCV)
hose.
3. Crankcase breather hose.
4. Engine coolant temperature (ECT) sensor
electrical connector.
5. Brake booster vacuum hose.
6. Disconnect the electrical connectors.
1. Powertrain control module (PCM).
2. Camshaft position (CMP) sensor.
7. Raise and support the vehicle. For
a
dditional information, refer to Section 100-
02.
8. Remove the engine undershield.
To Next Page
Loading...
