308-03-67 Manual Transaxle 308-03-67
DISASSEMBLY (CONTINUED)
E1162 EN 07/2001
All vehicles
3. Remove the clutch slave cylinder.
1. Remove the bolts.
2. Detach the clutch slave cylinder.
4. Remove the vehicle speed sensor (VSS).
1. Pull out the retaining pin.
2. Pull out the VSS.
5. Detach the cover and the detent
mechanism.
1. Cover
2. Fifth gear detent mechanism
3. Auxiliary shift rod detent mechanism
6. Remove the snap-rings and the selector
finger.
1. 5th gearwheel snap-ring
2. 5th gear synchronizer snap-ring
3. Slacken the bolt and remove the selector
finger.
To Next Page
Loading...
