308-03-69 Manual Transaxle 308-03-69
DISASSEMBLY (CONTINUED)
E1162 EN 07/2001
10. CAUTION: Do not strike the mating
face.
Detach the 5th gear housing.
1. Unscrew the bolts and carefully tap the
housing sections apart.
2. Release and remove the housing gasket.
11. CAUTION: Do not strike the mating
face.
Remove the gasket, detach the snap-rings
and pull out the auxiliary plug.
1. Gasket
2. Output shaft snap-ring
3. Input shaft snap-ring
4. Pull out the auxiliary plug.
12. Remove both oil seals (left-hand side
shown).
• Lever out the front drive halfshaft oil
seals using the special tool.
• The reversing lamp switch only needs to
be removed for sealing work.
13. NOTE: To lift the housing off, turn it slightly
(the transmission breather pipe catches on
the input shaft).
Separate the transmission housing
sections.
• Remove the bolts and lightly tap on the
transmission housing sections to carefully
separate them.
To Next Page
Loading...
