308-03-106 Manual Transaxle 308-03-106
INSTALLATION (CONTINUED)
E6701 EN 07/2001
30. Install the resonator.
Vehicles with 1.6L / 1.3L engine
31. Install the transaxle upper flange bolt.
32. Install the transaxle upper flange bolt and
ground cable, connect the electrical
connectors and the hose.
1. Install the flange bolt with ground cable
2. Reconnect the generator electrical
connector
3. Reconnect the starter motor electrical
connector
4. Attach the transaxle ventilation hose
33. Connect the electrical connectors.
1. Heated oxygen sensor (HO2S) electrical
connector
2. Ignition coil electrical connector
3. Powertrain control module (PCM)
electrical connector
4. Vehicle speed sensor (VSS) electrical
connector
To Next Page
Loading...
