H3C S5120-SI Series Command Reference

1-14
Parameters
None
Description
Use the shutdown command to shut down the current aggregate interface/subinterface.
Use the undo shutdown command to bring up the current aggregate interface/subinterface.
By default, aggregate interfaces are up.
Examples
# Shut down Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] shutdown

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English