H3C S5120-SI Series Command Reference

1-4
Field Description
Power port class
PoE device type, which can be :
z PSE: power sourcing equipment
z PD: powered device
PSE power supported Indicates whether the device can operate as a PSE.
PSE power enabled Indicates whether the device is operating as a PSE.
PSE pairs control ability Indicates whether the PSE-PD pair control is available.
Power pairs
PoE mode, which can be Signal (PoE via signal lines) or Spare (PoE
via spare lines).
Port power classification
Port power classification of the PD, which can be:
z Class 0
z Class 1
z Class 2
z Class 3
z Class 4
Link aggregation supported Indicates whether link aggregation is supported.
Link aggregation enabled Indicates whether link aggregation is enabled.
Aggregation port ID Aggregation group ID, which is 0 if link aggregation is not enabled.
Maximum frame Size Maximum frame size supported
MED information MED LLDP information
Media policy type
Media policy type, which can be:
z unknown
z voice
z voiceSignaling
z guestVoice
z guestVoiceSignaling
z softPhoneVoice
z videoconferencing
z streamingVideo
z videoSignaling
Unknown Policy Indicates whether the media policy is unknown.
VLAN tagged Indicates whether packets of the media VLAN are tagged.
Media Policy VlanID ID of the media VLAN
Media Policy L2 priority Layer 2 priority
Media Policy Dscp DSCP precedence
Location format
Location information format, which can be:
z Invalid, indicating the format of the location information is
invalid.
z Coordinate-based LCI, indicating the location information is
coordinate-based.
z Civic Address LCI, indicating normal address information.
z ECS ELIN, indicating a telephone number for urgencies.
PoE PSE power source
PSE power type, which can be:
z Unknown, indicating an unknown power supply
z Primary, indicating a primary power supply
z Backup, indicating a backup power supply

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English