1-8
By default, the default authentication method is used for LAN access users.
Note that the RADIUS scheme specified for the current ISP domain must have been configured.
Related commands: authentication default, radius scheme.
Examples
# Configure the default ISP domain system to use local authentication for LAN access users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authentication lan-access local
# Configure ISP domain test to use RADIUS authentication scheme rd for LAN access users and use
local authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication lan-access radius-scheme rd local
authentication login
Syntax
authentication login { local | none | radius-scheme radius-scheme-name [ local ] }
undo authentication login
View
ISP domain view
Default Level
2: System level
Parameters
local: Performs local authentication.
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
Description
Use the authentication login command to configure the authentication method for login users.
Use the undo authentication login command to restore the default.
By default, the default authentication method is used for login users.
Note that the RADIUS scheme specified for the current ISP domain must have been configured.
Related commands: authentication default, radius scheme.
Examples
# Configure the default ISP domain system to use local authentication for login users.
<Sysname> system-view
[Sysname] domain system
To Next Page
Loading...
Need help?
General