1-17
Note that:
z With no parameter specified, the command displays brief information about all AAA user
connections.
z If you specify the ucibindex ucib-index combination, the command displays detailed information;
otherwise, the command displays brief information.
z This command does not apply to FTP user connections.
Related commands: cut connection.
Examples
# Display information about all AAA user connections.
<Sysname> display connection
Index=1 ,Username=telnet@system
IP=10.0.0.1
Total 1 connection(s) matched.
Table 1-1 display connection command output description
Field Description
Index Index number
Username Username of the connection, in the format username@domain
IP IP address of the user
Total 1 connection(s) matched. Total number of user connections
display domain
Syntax
display domain [ isp-name ]
View
Any view
Default Level
1: Monitor level
Parameters
isp-name: Name of an existing ISP domain, a string of 1 to 24 characters.
Description
Use the display domain command to display the configuration information of a specified ISP domain or
all ISP domains.
Related commands: access-limit enable, domain, state.
Examples
# Display the configuration information of all ISP domains.
To Next Page
Loading...
Need help?
General