2-6
Field Description
Retransmission times for timeout Times of retransmission in case of timeout
Interval for realtime accounting(minute) Interval for realtime accounting in minutes
Retransmission times of realtime-accounting
packet
Retransmission times of realtime-accounting
packet
Retransmission times of stop-accounting packet Retransmission times of stop-accounting packet
Quiet-interval(min) Quiet interval for the primary server
Username format Format of the username
Data flow unit Unit of data flows
Packet unit Unit of packets
nas-ip address
Source IP address for RADIUS packets to be
sent
display radius statistics
Syntax
display radius statistics
View
Any view
Default Level
2: System level
Parameters
None
Description
Use the display radius statistics command to display statistics about RADIUS packets.
Related commands: radius scheme.
Examples
# Display statistics about RADIUS packets.
<Sysname> display radius statistics
state statistic(total=1048):
DEAD = 18000 AuthProc = 0 AuthSucc = 0
AcctStart = 0 RLTSend = 0 RLTWait = 0
AcctStop = 0 OnLine = 0 Stop = 0
Received and Sent packets statistic:
Sent PKT total = 1547 Received PKT total = 23
Resend Times Resend total
1 508
2 508
To Next Page
Loading...
Need help?
General