H3C S5120-SI Series

2-5
Primary Acct Server:
IP: 1.1.1.1 Port: 1813 State: block
Second Auth Server:
IP: N/A Port: 1812 State: block
Second Acct Server:
IP: N/A Port: 1813 State: block
Auth Server Encryption Key : 123
Acct Server Encryption Key : Not configured
Accounting-On packet disable, send times : 5 , interval : 3s
Interval for timeout(second) : 3
Retransmission times for timeout : 3
Interval for realtime accounting(minute) : 12
Retransmission times of realtime-accounting packet : 5
Retransmission times of stop-accounting packet : 500
Quiet-interval(min) : 5
Username format : without-domain
Data flow unit : Byte
Packet unit : one
nas-ip address : 1.1.1.1
------------------------------------------------------------------
Total 1 RADIUS scheme(s).
Table 2-1 display radius scheme command output description
Field Description
SchemeName Name of the RADIUS scheme
Index Index number of the RADIUS scheme
Type Type of the RADIUS server
Primary Auth Server Primary authentication server
Primary Acct Server Primary accounting server
Second Auth Server Secondary authentication server
Second Acct Server Secondary accounting server
IP
IP address of the server. N/A means not
configured.
Port
Service port of the server. If no port configuration
is performed, the default port number is
displayed.
State Status of the server, active or block.
Auth Server Encryption Key Shared key of the authentication server
Acct Server Encryption Key Shared key of the accounting server
Accounting-On packet disable The accounting-on feature is disabled
send times Retransmission times of accounting-on packets
interval Interval to retransmit accounting-on packets
Interval for timeout(second) Timeout time in seconds