H3C S5120-SI Series Command Reference

1-5
Basic ACL 2001, named flow, 1 rule,
ACL's step is 5
rule 5 permit source 1.1.1.1 0 (5 times matched)
rule 5 comment This rule is used on GE1/0/1
Table 1-1 display acl command output description
Field Description
Basic ACL 2001
Category and number of the ACL. The following
field information is about basic ACL 2001.
named flow
The name of the ACL is flow. "–none-" means
the ACL is not named.
1 rule The ACL contains one rule.
ACL's step is 5 The rule numbering step is 5.
5 times matched
There have been five matches for the rule. Only
ACL matches performed by software are
counted.
This field is not displayed when no packets have
matched the rule.
rule 5 comment This rule is used on GE1/0/1
The description of ACL rule 5 is “This rule is used
on GE1/0/1.”
display acl resource
Syntax
display acl resource
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display acl resource command to display the usage of ACL resources on a device.
Examples
# Display the ACL resource usage of device.
<Sysname> display acl resource
----------------------------------------------------
GE1/0/1..GE1/0/24
GE1/0/49 GE1/0/50
----------------------------------------------------
Type Total Reserved Configured Remaining

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English