H3C S5120-SI Series

1-3
local mode: client, local poll: 6
peer mode: server, peer poll: 6
offset: 0.0000 ms,delay: 0.00 ms, disper: 0.02 ms
root delay: 0.00 ms, root disper: 10.00 ms
reach: 1, sync dist: 0.010, sync state: 2
precision: 2^18, version: 3, peer interface: InLoopBack0
reftime: 10:56:22.442 UTC Aug 7 2009(CE2686D6.71484513)
orgtime: 10:56:22.442 UTC Aug 7 2009(CE2686D6.71484513)
rcvtime: 10:56:22.442 UTC Aug 7 2009(CE2686D6.7149E881)
xmttime: 10:56:22.442 UTC Aug 7 2009(CE2686D6.71464DC2)
filter delay : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
filter offset: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
filter disper: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Total associations : 1
Table 1-2 display ntp-service sessions verbose command output description
Field Description
clock source IP address of the clock source
clock stratum
Stratum level of the clock source, which determines the clock
precision. The value range is 1 to 16. The clock precision
decreases from stratum 1 to stratum 16. A stratum 1 clock
has the highest precision, and a stratum 16 clock is not
synchronized.
clock status
Status of the clock source corresponding to this session,
including
z configured: The session was created by a configuration
command.
z dynamic: This session is established dynamically.
z master: The clock source is the primary reference source
of the current system.
z selected: The clock source has survived the clock
selection algorithm.
z candidate: The clock source is the candidate reference
source.
z sane: The clock source has passed the sane
authentication.
z insane: The clock source has failed the sane
authentication.
z valid: The clock source is valid, which means the clock
source meet the following requirements: it has passed the
authentication and is being synchronized; its stratum level
is valid; its root delay and root dispersion values are within
their ranges.
z invalid: The clock source is invalid.
z unsynced: The clock source has not been synchronized
or the value of the stratum level is invalid.