1-5
After the configuration takes effect, use the display clock command to view the result. The information
such as log file and debug adopts the local time modified by time-zone and daylight saving time.
Related commands: clock datetime, clock summer-time one-off, clock summer-time repeating,
display clock.
Examples
# Set the name of the local time zone to Z5, five hours ahead of UTC time.
<Sysname> system-view
[Sysname] clock timezone z5 add 5
command-privilege
Syntax
command-privilege level level view view command
undo command-privilege view view command
View
System view
Default Level
3: Manage level
Parameters
level level: Command level, in the range 0 to 3.
view view: Specifies a view. The value shell of the argument view represents user view. The specified
view must be the view to which the command provided by the command argument belongs; for the
corresponding view, refer to the "View" section of the specified command.
command: Command to be set in the specified view.
Description
Use the command-privilege command to assign a level for the specified command in the specified
view.
Use the undo command-privilege view command to restore the default.
By default, each command in a view has its specified level. For the details, refer to the related part of
Basic System Configuration in this manual. Command level falls into four levels: visit, monitor, system,
and manage, which are identified by 0 through 3. The administrator can assign a privilege level for a
user according to his need. When the user logs on a device, the commands available depend on the
user’s privilege. For example, if a user’s privilege is 3 and the command privilege of VTY 0 user
interface is 1, and the user logs on the system from VTY 0, he can use all the commands with privilege
smaller than three (inclusive).
Note that:
z You are recommended to use the default command level or modify the command level under the
guidance of professional staff; otherwise, the change of command level may bring inconvenience
to your maintenance and operation, or even potential security problem.
To Next Page
Loading...
Need help?
General