1-11
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display diagnostic-information command to display or save the statistics of the running
status of multiple modules in the system.
During daily maintenance or when the system is out of order, you need to display the running
information of each functional module to locate the problem. Generally, you need to execute the
corresponding display commands for each module, because each module has independent running
information. To collect more information at one time, you can execute the display
diagnostic-information command to display or save the statistics of the running status of multiple
modules in the system. Execution of the display diagnostic-information command equals execution
of the commands display clock, display version, display device, and display
current-configuration one by one.
Examples
# Save the statistics of each module's running status in the system.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)?[Y/N]y
Please input the file name(*.diag)[flash:/default.diag]:aa.diag
Diagnostic information is outputting to flash:/aa.diag.
Please wait...
Save succeeded.
You can view the content of the file aa.diag by executing the more.aa.diag command in user view, in
combination of the Page Up and Page Down keys.
# Display the statistics of each module's running status in the system.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
=================================================
===============display clock===============
=================================================
08:54:16 UTC Fri 11/15/2008
===================================================
===============display version===============
===================================================
……Omitted……
To Next Page
Loading...
Need help?
General