H3C S5120-SI Series Command Reference

1-3
Interface: GigabitEthernet1/0/15
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: GigabitEthernet1/0/16
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: GigabitEthernet1/0/17
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: GigabitEthernet1/0/18
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: GigabitEthernet1/0/19
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: GigabitEthernet1/0/20
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Table 1-1 display ndp command output description
Field Description
Neighbor Discovery Protocol is enabled NDP is enabled globally on the current device.
Neighbor Discovery Protocol Ver
Version of NDP
Hello Timer Interval to send NDP packets
Aging Timer
The time for the receiving device to hold NDP
information
Interface A specified port
Status NDP state of a port
Pkts Snd
Number of the NDP packets sent through the
port
Pkts Rvd Number of the NDP packets received on the port
Pkts Err Number of the error NDP packets received
Neighbor 1: Aging Time
Aging time of the NDP information of a neighbor
device
MAC Address MAC address of a neighbor device
Host Name System name of a neighbor device
Port Name Port name of a neighbor device
Software Ver
Software version of the neighbor device
Device Name Device model of a neighbor device
Port Duplex Port duplex mode of a neighbor device
Product Ver Product version of a neighbor device
BootROM Ver Boot ROM version of a neighbor device

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English