1-8
display ntdp device-list
Syntax
display ntdp device-list [ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
verbose: Displays the detailed device information collected through NTDP.
Description
Use the display ntdp device-list command to display the device information collected through NTDP.
Note that the information displayed may not be that of the latest device if you do not execute the ntdp
explore command before using this command.
Related commands: ntdp explore.
Examples
# Display the device information collected through NTDP.
<Sysname> display ntdp device-list
MAC HOP IP Device
00e0-fc00-3133 2 S5120
000f-e20f-c415 2 31.31.31.5/24 S5120
00e0-fc00-2579 1 S5120
00e0-fc00-1751 0 31.31.31.1/24 S5120
00e0-fd00-0043 2 S3610
00e0-fc00-3199 3 S5120
Table 1-3 display ntdp device-list command output description
Field Description
MAC MAC address of a device
HOP
Hops to the collecting device
IP
IP address and mask length of the management VLAN interface
on the device
Device Device model
# Display the detailed device information collected through NTDP.
<aaa_0.Sysname> display ntdp device-list verbose
Hostname : aaa_0.Sysname
MAC : 00e0-fc00-1400
Hop : 0
To Next Page
Loading...
Need help?
General