1-10
View
Any view
Default Level
1: Monitor level
Parameters
mac-address: MAC address of the device, in the format of H-H-H.
Description
Use the display ntdp single-device mac-address command to view the detailed NTDP information of
a specified device.
Examples
# Display the detailed NTDP information of the device with a MAC address of 00E0-FC00-5111.
<Sysname> display ntdp single-device mac-address 00e0-fc00-5111
Hostname : aaa_1.42-com2
MAC : 00e0-fc00-5111
Hop : 1
Device : S5120
IP : 16.168.1.2/24
Version :
H3C Comware Platform Software
Comware Software, Version 5.20, Alpha 1101
Copyright (c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C S5120
Cluster : Member switch of cluster aaa , Administrator MAC: 00e0-fc00-5175
Peer MAC Peer Port ID Native Port ID Speed Duplex
00e0-fc00-5175 GigabitEthernet1/0/1 GigabitEthernet1/0/1 100 FULL
00e0-fc00-5175 GigabitEthernet1/0/5 GigabitEthernet1/0/7 100 FULL
Table 1-4 display ntdp device-list command output description
Field Description
Hostname System name of the device
MAC MAC address of the device
Hop
Hops from the current device to the device that collect topology
information
Device Device model
IP
IP address and subnet mask length of the management VLAN
interface on the device
Version Version information
To Next Page
Loading...
Need help?
General