1-48
topology save-to
Syntax
topology save-to { ftp-server | local-flash }
View
Cluster view
Default Level
2: System level
Parameters
ftp-server: Saves the standard topology information to the FTP server.
local-flash: Saves the standard topology information to the local flash.
Description
Use the topology save-to command to save the standard topology information to the FTP server or the
local flash.
Note that:
z The file used to save standard topology on the FTP server or the local flash is named “topology.top”,
which includes both the information of blacklist and whitelist. A blacklist contains the devices that
are prohibited to be added to a cluster. A whitelist contains devices that can be added to a cluster.
z This command can be executed on the management device only.
Examples
# Save the standard topology information to the local flash on the management device.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] topology save-to local-flash
To Next Page
Loading...
Need help?
General