H3C S5120-SI Series Command Reference

1-1
1 HTTP Configuration Commands
HTTP Configuration Commands
display ip http
Syntax
display ip http
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ip http command to display information about HTTP.
Examples
# Display information about HTTP..
<Sysname> display ip http
HTTP port: 80
Basic ACL: 2222
Current connection: 0
Operation status: Running
Table 1-1 display ip http command output description
Field Description
HTTP port Port number used by the HTTP service
Basic ACL A basic ACL number associated with the HTTP service
Current connection The number of current connections
Operation status
Operation status, which takes the following values:
z Running: The HTTP service is enabled.
z Stopped: The HTTP service is disabled.

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English