H3C S5120-SI Series - Page 885

A-5
delete static-routes all 17-Static Routing Commands 1-1
delete-member 37-Cluster Management Commands 1-28
description 03-Ethernet Port Commands 1-2
description
04-Loopback Interface and Null Interface
Commands
1-1
description 05-Ethernet Link Aggregation Commands 1-1
description 09-VLAN Commands 1-1
description 27-ACL Commands 1-3
dhcp relay address-check 14-DHCP Commands 1-1
dhcp relay information circuit-id format-type 14-DHCP Commands 1-1
dhcp relay information circuit-id string 14-DHCP Commands 1-2
dhcp relay information enable 14-DHCP Commands 1-3
dhcp relay information format 14-DHCP Commands 1-4
dhcp relay information remote-id format-type 14-DHCP Commands 1-5
dhcp relay information remote-id string 14-DHCP Commands 1-5
dhcp relay information strategy 14-DHCP Commands 1-6
dhcp relay release ip 14-DHCP Commands 1-7
dhcp relay security refresh enable 14-DHCP Commands 1-9
dhcp relay security static 14-DHCP Commands 1-8
dhcp relay security tracker 14-DHCP Commands 1-9
dhcp relay server-detect 14-DHCP Commands 1-10
dhcp relay server-group 14-DHCP Commands 1-11
dhcp relay server-select 14-DHCP Commands 1-11
dhcp select relay 14-DHCP Commands 1-12
dhcp-snooping 14-DHCP Commands 3-1
dhcp-snooping information circuit-id
format-type
14-DHCP Commands 3-2
dhcp-snooping information circuit-id string 14-DHCP Commands 3-2
dhcp-snooping information enable 14-DHCP Commands 3-3
dhcp-snooping information format 14-DHCP Commands 3-4
dhcp-snooping information remote-id
format-type
14-DHCP Commands 3-5